|
¡´ 90 to 264 VAC universal input
¡´ Built-in EMI filter
¡´ High efficiency
¡´ 100% burn-in
¡´ Input surge current protection
¡´ Overvoltage protection
¡´ Overcurrent protection
¡´ Open PCB construction
¡´ Meets UL cUL TUV safety standards
|
|
| ¡´ Input voltage |
90 to 264 VAC |
| ¡´ Input frequency |
47 to 63 Hz single phase |
| ¡´ Input current |
1.6A (rms) for 115 VAC |
| |
0.8A (rms) for 230 VAC |
|
|
| ¡´ Efficiency |
78% type at full load |
| ¡´ Hold- up time |
8 msec at full load,
115V/230V |
| ¡´ Inrush current |
Internally limited by
thermistor
30A/115 VAC;
60A/230 VAC |
| ¡´ Withstand voltage |
3000 VAC, input to putput
1000 VAC, input to GND |
| ¡´ Operating temperature |
Full rating 0¢J to 50¢J |
| ¡´ Storage temperature |
-20¢J to +85¢J |
| ¡´ MTBF |
50,000 hours min.
Per MIL-HDBK-217E |
| ¡´ Burn-in |
100% for all shipped units |
| ¡´ EMI requirements |
Meets conduction limits of
a) FCC Class B
b) EN55022 Class B |
| ¡´ Safety requirements |
Meets
a) UL 60950,
b) EN60950 |
|
|
|
¡´ Operating Temperature: 0 ~ +40¢J
¡´ Operating Humidity: 20 ~ 85%
¡´ Storage Temperature: - 40 ~ +70¢J
¡´ Storage Humidity: 10 ~ 95%
|
|
| ¡´ Output voltage |
12V ~ 24V |
| ¡´ Output current |
5A ~ 6.25A |
| ¡´ Output wattage |
75W max. |
| ¡´ Ripple and noise |
1% P-P max. |
| ¡´ Overvoltage protection |
shunt down type, 110 to 140% of nominal on +12V output; auto recovery. |
| ¡´ Overcurrent protection |
Overpower protection; 100 to 160%of rated power. |
| ¡´ Temperature coefficient |
¡Ó0.04%¢J max. outputs |
| ¡´ Line regulation |
¡Ó1% (entire operation range) |
| ¡´ Load regulation |
¡Ó5% (main load to full load) |
|
|
